Bikes & Recreational Vehicles Recalls

Hazard: The throttle lever on the recalled ATVs can fail to return to the idle position when a driver releases it, and the vehicle could then unexpectedly continue to accelerate, posing a crash hazard.

Hazard: The recalled helmets do not comply with the positional stability, retention system, impact, labeling and certification requirements of the mandatory federal safety regulations for bicycle helmets. The helmets can fail to protect the wearer in the event of a crash, posing a risk of head injury.

Hazard: The recalled youth ATVs fail to comply with the requirements of the federal mandatory ATV regulations. The handlebars pose a laceration hazard if the child rider's body or head impacts the handlebars at a high rate of speed. ATVs that fail to meet the mandatory safety requirements pose a risk of serious injury or death.

Hazard: The winch wiring can overheat while in use, posing a fire hazard and risk of serious injury to the rider or passenger.

Hazard: The ATV can leak fuel at the fuel pump flange outlet, posing a fire hazard and risk of serious injury to the rider or passenger.

Hazard: A loss of alignment between the handlebar and front wheel, due to insufficient torquing of steerer clamp bolts, can cause the rider to lose control of the steering, posing a fall hazard

Hazard: The youth ATVs fail to comply with the requirements of the federal mandatory ATV safety standard. The handlebars pose a laceration hazard if the child rider's body or head impacts the handlebars at a high rate of speed. Additionally, the parking brakes fail to hold, posing a collision hazard. The ATVs are also missing the required safety reflectors for vehicles intended for use by children 10 years and older. The 518 CY125ATV-6 model's footguards pose a laceration, contusion, and amputation hazard if the rider's foot enters the rear wheel environment. ATVs that fail to meet these mandatory safety requirements pose a risk of serious injury or death.

Hazard: The e-scooter's brakes can fail, posing a risk of serious injury and crash hazard.

Hazard: The pin on the u-joint of the steering knuckle was not swagged correctly, which can allow the pin to come out of the u-joint and cause the rider to lose steering control, posing a crash hazard.

Hazard: When starting the engine, improper combustion can occur, posing a fire hazard.

Hazard: The shock absorber rod assembly can unthread and detach, causing suspension collapse, posing crash and tip-over hazards to the rider.

Hazard: The grip can detach from the handlebar, posing crash and injury hazards.

Hazard: The frames of the recalled cargo bicycles can crack and can bend and break, posing a fall hazard to the rider.

Hazard: The front disc brake rotor and brake pads can be misaligned, which can cause brake failure, posing crash and injury hazards.

Hazard: The recalled helmets do not comply with the positional stability requirements of the CPSC federal safety standard for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

Hazard: The fuel tank cap does not fit correctly, causing a fuel leak around the filler neck, posing a fire hazard.

Hazard: The steering caps, which are used to hold the handlebar in place, can crack and cause the handlebars to become unstable, posing a crash hazard.

Hazard: The recalled snowmobile's drive clutch can break, allowing fragments to escape the snowmobile shielding, posing a laceration hazard.

Hazard: The snowmobile can leak fuel at the pump flange assembly, posing a fire hazard and risk of serious injury to the rider or passenger.

Hazard: The bicycle's crank arms can loosen and/or detach from the crank/spindle, posing fall and injury hazards.

Hazard: The helmets do not comply with the positional stability, dynamic strength of retention system, impact attenuation, and certification requirements in violation of the CPSC federal safety regulation for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

Hazard: The Stem Raiser can shift during use, causing the bicycle's handlebar to shift unexpectantly, posing a fall hazard.

Hazard: The fuel line between the fuel rails can leak, posing a fire hazard.

Hazard: The brake line can come in contact with the brake disc, which can cause damage to the brake line and result in brake loss, posing an injury hazard.

Hazard: The bicycle headtube/downtube weld can become damaged and separate from the bicycle frame, posing fall and injury hazards.

Hazard: The bicycle headtube/downtube weld can become damaged, and separate from the bicycle frame, posing fall and injury hazards.

Hazard: The primary (drive) clutch can fail causing the clutch or its components to separate from the vehicle, posing an injury hazard.

Hazard: The strap anchor can become dislodged from the helmet when sufficient force is applied, and therefore violates the CPSC federal safety regulation for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

Hazard: The stems' faceplate can crack and break, loosening the handlebars, and cause the rider to lose control, posing a risk of injury to the user in a crash.

Hazard: The bicycles do not meet U.S. safety standards for bicycles, posing crash and injury hazards to children. The 10-inch, 12-inch, and 16-inch bicycles are equipped with hand brakes but no footbrakes. The 20-inch bicycles are not equipped with a chain guard and the pedals do not come with reflectors. Federal regulations require bicycles with seat heights that measure at or below 25 inches to be equipped with foot brakes and require a full coverage chain guard, intended to prevent entrapment of clothing or body parts.