Bikes & Recreational Vehicles Recalls

Hazard: The wiring harness that manages the charging of the lithium-ion battery was not properly assembled, creating a risk of overheating and fire while charging.

Hazard: The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard.

Hazard: The recalled e-bikes can accelerate unexpectedly, resulting in loss of control, posing crash and injury hazards.

Hazard: The strap anchor can become dislodged from the helmet when sufficient force is applied, and therefore violates the CPSC federal safety regulation for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

Hazard: The recalled hoverboard's lithium-ion battery can overheat, posing a fire hazard.

Hazard: Components of the steering shaft/steering system could have been improperly assembled which can lead to loss of control, posing crash and collision hazards.

Hazard: The operator's guide maintenance schedule section contains incorrect information regarding proper maintenance intervals for the clutch which can lead to clutch failure, including fragments to be ejected from the vehicle if not serviced, posing a risk of serious injuries.

Hazard: The steering system can lock up while in use, posing a crash hazard and risk of serious injury to children.

Hazard: Pressing the brake and throttle pedals simultaneously can deactivate the throttle. If the brake is then released, the vehicle can move and the throttle can still be deactivated, posing a crash hazard and risk of serious injury.

Hazard: The ignition coil can fail to ignite one of the engine cylinders, allowing uncombusted fuel to enter the exhaust pipe where it could ignite, posing a fire hazard.

Hazard: The ring gear on the primary clutch can fail, causing the clutch assembly components to come loose, posing an injury hazard to consumers.

Hazard: The primary (drive) clutch can fail and can cause the clutch or clutch components to come loose, posing an injury hazard to consumers.

Hazard: The pedal body can detach from the pedal spindle and/or the pedal spindle can break, posing a fall hazard.

Hazard: An improperly installed center brake line can cause the rear brake circuit to remain pressurized during operation, resulting in overheated brakes and reduced braking performance, posing fire and crash hazards.

Hazard: The bicycles do not meet the U.S. safety standard, posing fall and injury hazards to the rider.

Hazard: The improperly routed brake line can contact the front wheels during vehicle operation resulting in brake line damage and brake loss, posing a crash hazard.

Hazard: The skateboards can stop balancing the rider if the boards' limits are exceeded, posing a crash hazard that can result in serious injury or death.

Hazard: The passenger side seat belt buckle bracket was not properly welded, which could result in the seat belt anchor point separating from the frame, posing an injury hazard to consumers.

Hazard: The rear brake hose can kink and break when turning the handlebars, causing the rider to lose control of the bike, posing a crash hazard.

Hazard: The recalled bonded crank parts can separate and break, posing a crash hazard to consumers.

Hazard: Incorrectly installed check valves and vent hoses can lead to fuel overflow, posing a fire hazard.

Hazard: The tire bead can unseat from the rim and lead to rapid air loss in the tires, resulting in loss of control and posing a fall hazard.

Hazard: The handlebar hooks on the recalled snowmobiles pose a puncture hazard and risk of serious injury if the rider's body impacts the handlebar hook during a crash.

Hazard: The main injector fuel return hose can leak, posing a fire hazard. This can also result in serious property damage, injuries or even death.

Hazard: The bolt on the electric scooter can come loose causing the suspension and wheel assembly to separate, posing fall and injury hazards.

Hazard: The vehicle's clutch can fracture, causing fragments to be ejected from the vehicle, posing fire and injury hazards.

Hazard: A fuel leak can occur at the fuel pump outlet connector on the fuel tank near a hot surface, posing a fire hazard.

Hazard: The brake hose can detach from the brake lever, posing a crash hazard.

Hazard: Fuel can leak from under the fuel cap, posing a fire hazard.

Hazard: The fuel rail dampener snap ring can become loose and leak fuel, posing a fire hazard.