Sports & Recreation Recalls

Hazard: The cables that support climbers using these devices can fail, causing climbers to fall.

Hazard: The wheels on these roller skates can detach and the brakes can fail. Either one of these hazards can cause the skater to fall and suffer serious injury.

Hazard: The snowboard binding's plastic base can break during use, posing a risk that snowboarders can fall and suffer a serious injury.

Hazard: The carbon dioxide (CO2) cartridges can be forcibly ejected out the back of the paintball marker and break the plastic screw-on cap. This poses a serious risk of injury to the paintball marker's operator, who can be hit forcefully by the CO2 cartridges or the plastic screw-on cap. Overtightening the screw-on cap after the cartridges are pierced can result in a serious impact injury.

Hazard: The plastic boot cuff can crack when flexed open in an unbuckled non-skiing position, causing discomfort on the ankle or shin, making the problem evident prior to skiing and thus unsuitable for use.

Hazard: Hydrogen gas can build up in the battery compartment and cause the battery cover and the battery package to forcefully expel from the product, posing a risk of injury to the user or bystanders.

Hazard: The seams of the inflatable arm bands can tear, causing them to deflate. This poses a drowning hazard to young children.

Hazard: If assembly instructions are not properly followed, the gas spring/shock can be damaged during assembly, if the walking platform is folded up and goes beyond the vertical position. This action can cause the shock to contact the treadmill roller and be damaged, and could propel shock parts out. The parts of the shock could hit a bystander, causing injury.

Hazard: The treadmill can unexpectedly accelerate and cause users to fall and sustain injuries.

Hazard: The accelerator pedal can temporarily stick when depressed, resulting in unexpected acceleration or difficulty braking.

Hazard: A weld on the bench frame, under the seat, can crack and separate from the main frame, allowing the bench to collapse and the user to fall and suffer injuries.

Hazard: Hydrogen gas can build up in the battery compartment and cause the battery cover and the battery package to forcefully expel from the product, posing a risk of injury to the user or bystanders.

Hazard: This product, which assists wall climbers during descent, has a faulty bearing that can cause the brakes to fail. When this occurs, wall climbers risk rapid descent, with no braking capability.

Hazard: An internal electrical component of the coffeemaker can overheat and ignite, posing a fire hazard to consumers.

Hazard: The metal wire on these products could break at or near a weld point, exposing a hockey goalie to facial injuries.

Hazard: The harnesses could fail during use, resulting in consumers falling from tree stands and suffering serious injuries or death.

Hazard: The vertical rails at the front of these crampons can break, which could result in falls and injuries to consumers.

Hazard: A slow leak from the shoulder exhaust caused by expansion of an internal cable housing could result in slow deflation. This could impact the diver's ability to control buoyancy.

Hazard: The dive computers were improperly calibrated, resulting in incorrect calculations. Diving with an improperly calibrated dive computer can provide inaccurate "No Decompression (no stop) Time," "Decompression Time," "Desaturation Time" and "No Fly Time." This could result in divers suffering serious injuries, including decompression sickness.

Hazard: The baseplate of the binding can break, resulting in loss of control and possible fall and injury to the snowboarder.

Hazard: Microscopic cracks in the brake equalizer rods on certain vehicles may cause the rods to fatigue and fail prematurely in continuous use. Such failure could result in a loss of braking ability.

Hazard: The pin used to secure the rear snaplock lever to the bindings can bend or break.

Hazard: The bolt attaching the arm to the vertical post can break, causing the backboard to fall and injure someone standing below.

Hazard: An insufficient bond may cause a break in the converter coupling, which could impact the diver's ability to control buoyancy.

Hazard: When opening or folding up these exercise machines, consumers can catch their fingers in the hinges. This can result in lacerations, crushing, or amputation to fingertips. This does not occur while users are exercising.

Hazard: Undersized o-rings installed on the cross bar can cause a loss of breathing air from the SCUBA cylinder, presenting a risk of drowning.

Hazard: The seat pin on the Power Pro with "Lat Tower" and Ultimate models can break or become disengaged, allowing the seat to move suddenly. Also, the incline support bracket on the Power Pro without a "Lat Tower" can break, allowing the incline bench to move suddenly. Both hazards pose a fall risk to the user.

Hazard: The carabiner gate may come open under a heavy load, which will significantly reduce the strength of the carabiner. The carabiner could break if the climber falls, posing a risk of serious injury or death to the climber.

Hazard: The red plastic skis used on certain 2004 Firecat and Sabercat snowmobiles could crack or break as a result of off-season exposure to ultraviolet sunlight. Ski failure could lead to loss of control, that could result in severe injury or death.

Hazard: Inflator buttons can stick, which can cause uncontrolled inflation of the BC. This could cause divers to ascend too fast, resulting in decompression sickness as well as the danger of an embolism.