Vehicle Equipment Recalls

Hazard: Without proper rim markings, owners may not be able to identify affected wheels in the event of a wheel recall. Defective or noncompliant wheels that are not remedied are at an increased risk of performance failure, and thereby increase the risk of a crash or other safety hazard to motorists.

Hazard: If the fan overheats and shorts, the fan or adjacent components may catch fire.

Hazard: A gas leak, in the presence of an ignition source, can result in a fire.

Hazard: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of personal injury.

Hazard: The loose fitting of the lug nuts to the steel wheel may allow the wheel to detach from the vehicle, which may increase the risk of a vehicle crash.

Hazard: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of personal injury.

Hazard: If the non-formed hub unit is installed on a Jeep Liberty 4x2 model (which does not use an axle nut for hub retention), the vehicle wheel will not be secure and a front wheel separation may occur, increasing the risk of a crash.

Hazard: If a brake tube becomes damaged and leaks fluid, it may result in increased stopping distances, and in some cases, loss of vehicle front braking performance, which could increase the risk of a crash.

Hazard: If the door separates from the APU while the vehicle is being driven, it may create a road hazard for other drivers.

Hazard: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of personal injury.

Hazard: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of personal injury.

Hazard: If dropped, the fire extinguishers may rupture causing a sudden release of the propellant and possibly causing personal injury.

Hazard: The fuel delivery valve may crack and leak diesel fuel. A fuel leak in the presence of an ignition source may result in a fire.

Hazard: If the user touches an affected plug, conditions may exist in which the user receives an electrical shock.

Hazard: In the event the egress window fails during an actual emergency situation, passengers may be trapped in the vehicle placing them at risk of injury.

Hazard: A fuel leak, in the presence of an ignition source, may result in a vehicle fire.

Hazard: Without proper contact of the rooftop rack clip to the door frame, there is insufficient clamping pressure and friction. The system may slide off the vehicle when loaded with accessories, possibly becoming a road hazard to other vehicles or causing injury to pedestrians.

Hazard: A user could suffer an electrical shock should they contact the electrical lead. This risk may exist even when the charging station is turned off.

Hazard: Without the driver being alerted that the back-up brake system has malfunctioned, the driver may continue to operate the vehicle as normal, and if the primary brake system system also fails, braking performance would be reduced increasing the risk of a crash.

Hazard: As a consequence, the reflective properties of the warning triangle have been deminished and may not be clearly visible to oncoming traffic, increasing the risk of a crash.

Hazard: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of personal injury.

Hazard: In the event of a crash, the seat occupant may not be properly restrained, possibly resulting in injury.

Hazard: This condition could cause the fan motor to become inoperative, or cause the motor circuit board in the assembly to overheat, potentially leading to a fire in the engine compartment.

Hazard: This interference could prevent the gas pedal from retracting and the vehicle may not decelerate as expected when the driver lifts their foot from the gas pedal, which could increase the risk of a crash. Should the pedal become trapped, steady application of the brakes will allow the vehicle to be brought to a stop.

Hazard: The battery separator contained in the APU could experience an internal circuit board capacitor failure, which could result in a fire.

Hazard: FAILURE OF THE TURBINE OR COMPRESSOR WHEEL MAY RESULT IN SMOKE, FIRE AND STALLING.

Hazard: THESE ISSUES CAN RESULT IN A BRAKE FLUID LEAK AND LOSS OF BRAKING CAPABILITY, INCREASING THE RISK OF A VEHICLE CRASH.

Hazard: IN THE EVENT OF A CRASH, THE WEARER OF THE HELMET MAY NOT BE ADEQUATELY PROTECTED, POSSIBLY RESULTING IN INJURY OR DEATH.

Hazard: A SHORT CIRCUIT CAN RESULT IN OVERHEATING POSSIBLY RESULTING IN A FIRE.

Hazard: THE INSUFFICIENT MACHINING AND USE OF THE SUPPLIED HUB CENTERING RING FOR THESE WHEELS MAY CAUSE THE WHEEL AND TIRE ASSEMBLY TO BECOME LOOSE OR POTENTIALLY FALL OFF DURING VEHICLE OPERATION, INCREASING THE RISK OF A CRASH.