Bikes & Recreational Vehicles Recalls

Hazard: The rear brake caliper can crack or break, reducing the brake system's effectiveness, posing a risk of serious injury or death due to crash hazard.

Hazard: The alloy insert located in the front crown hole of the carbon fork can come loose, causing an accessory to fall off and land on the bike's front wheel, posing a risk of serious injury or death from a fall and crash hazard.

Hazard: The recalled youth ATVs violate the mandatory safety standard for ATVs because the parking brakes fail to hold and the ATV's speed limiting device is not set to the restricted speed required for children ages six (6) and older, posing a crash hazard. Additionally, the ATVs are missing the required rear safety reflectors, reducing visibility of the youth ATV to other vehicles, posing a deadly crash hazard.

Hazard: The recalled youth ATVs violate the mandatory safety standard for ATVs because they are missing brake lights, reducing visibility of the youth ATV to other vehicles, posing a deadly crash hazard.

Hazard: The drive converter sheave can break in certain circumstances, resulting in metal fragments being discharged within the engine compartment and surrounding area, posing impact and injury hazards.

Hazard: The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the impact attenuation and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The recalled youth ATVs violate the federal mandatory ATV safety standard, posing a risk of serious injury or death. The youth ATVs fail to meet mechanical suspension requirements, and the reverse indicator light fails to illuminate, posing a crash hazard. The parking brakes fail to hold, posing a collision hazard. Additionally, the surfaces near the footwell can reach high temperatures, posing a risk of severe burns.

Hazard: The ATV's speed limiter control can malfunction, causing unexpected speed and acceleration, posing a serious risk of injury or death from crash hazard.

Hazard: The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the positional stability and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The recalled helmets violate the mandatory safety standard for bicycle helmets because they do not comply with the positional stability, labeling and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The handlebar's clamp can unexpectedly cause the handlebar to rotate, posing a risk of serious injury or death due to a crash hazard.

Hazard: A loose screw can cause the front tube to fold down unexpectedly, posing a risk of injury from a fall hazard.

Hazard: The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the impact attenuation, positional stability, and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The bike's fork steerer tube can develop a small fatigue crack that can lead to a progressive failure of the fork, posing a fall hazard.

Hazard: The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the retention system and positional stability requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the positional stability and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the impact attenuation, positional stability, labeling and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The buckle can fail to fully latch when used with children in the cargo area, posing injury hazards to children.

Hazard: The fan wheel on the recalled pressure washers can fail, causing abnormal burner operation that can produce smoke and/or bursts of flames during use, posing a fire hazard.

Hazard: The rear wheel bolts can break when torqued, causing the wheel to separate from the bicycle, posing a fall hazard.

Hazard: The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the impact attenuation, positional stability, labeling and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The pedal axle can crack, causing the pedal to detach from the crank, posing a fall hazard to the rider.

Hazard: The trike frame can develop a hairline fracture near a weld, which can cause the tubes to separate, posing fall and laceration hazards.

Hazard: The recalled youth ATVs violate the mandatory ATV safety standard. The youth ATVs' mechanical suspension fails to comply with safety requirements, posing a crash hazard. Additionally, the handlebars pose a laceration hazard, if the child rider's body or head impacts the handlebars at high speed. ATVs that fail to meet the mandatory safety requirements pose a risk of serious injury or death.

Hazard: The bolts on the chainring can come loose, causing the chainring to separate from the bike, resulting in a fall or crash hazard to the user.

Hazard: The recalled children's and youth helmets violate the mandatory safety standard for bicycle helmets. Particularly, the helmets do not comply with the positional stability and coverage requirements. The helmets can fail to protect the user in the event of a crash, posing a risk of injury or death due to head injury.

Hazard: The riding mower's steering arm dampers can be installed incorrectly, which can result in an unexpected bouncing motion and loss of operator control, posing a crash hazard.

Hazard: The coaster brakes can fail to engage, resulting in the rider losing control, posing a crash hazard.

Hazard: The pump's canister can forcefully eject from the base when pressurized, posing a risk of serious injury from impact to the user or bystander.

Hazard: The left front wheel can detach during use, posing a fall hazard.